Understanding About Basement Waterproofing Materials

Many different materials can be used to waterproof a basement. The area you live in affects how much moisture you expect. 

Some waterproofing materials are better suited for some areas than others.

When waterproofing a basement, proper ground leveling so water can be drained away from the house. Drains include a system of gravel, ditches, and pipes that drain groundwater into a pipe from the basement or foundation of a home. About ten feet from home, the ground should be leveled so that the ground level decreases by one inch per foot. Dirt and roads can clog this type of drainage system.

Drainage systems, including the presence of a main floor drain in the basement, effectively remove water from the basement. These systems must be put in place when the basement is first built. The type of system can permanently use a sump pump to remove water from the basement. The pipeline can be laid along the basement walls and under the basement before pouring the Bayset concrete floor. The water is then directed from the house to an area that will no longer cause problems.

Drainage pumps can be powered by electricity, and some have a battery backup in case of a power outage. Scheduled maintenance of drain pumps should be done annually, more frequently if you live in an area prone to water problems. It is also essential to maintain the pipes of the drainage system to avoid clogging. Gutters and gutters should also be checked to ensure they are free of debris.

Other basement waterproofing materials include sealants. Sealant paint is one way to waterproof a basement. It should be one of many waterproofing methods. Sealing concrete to prevent water from seeping out works best in areas with little moisture. Sealant is applied to the inside of the basement. Water can reach this point but not seep into the basement. If your concrete constantly has to deal with this much hydrostatic pressure without any other waterproofing system, it creates a problem.

Special channels can be installed along the inner walls of the basement. Along the bottom of the wall, close to the floor, a series of small holes invite water into the channel. Inside these channels, small pipes divert water using a sump pump system. The type of basement drainage can be hidden behind walls in finished basements.

Summary

There are other basement waterproofing materials out there, and if you need a complete system, you can hire a contractor to do the job. The job is not to be taken lightly, as it is an entire floor in your home, and you need to ensure it is properly insulated from water. It will keep your belongings dry and prevent mold from growing. If you need a complete system, your best bet is to find a good basement waterproofing contractor.